Linksys extender

Sometimes the routers cannot cover a very large area such as a huge house or a small work office or something similar. The routers which can cover a relatively larger area are a little too pricey and do not fit under everyone’s budget. And some people don’t want to go around buying more routers just so they can have a little extra coverage. But the problem of dead spots in the Wi-Fi coverage still remains. Sometimes there are different types of barriers such as thick concrete walls, different floors and so on and the Wi-Fi signal gets blocked so they just don’t get the coverage that was promised. And all the users cannot just sit in one place where the router is set up. This is where the Extender enters the scene. The Wi-Fi Extender, sometimes called the Wi-Fi range extender, is a type of a wireless device which is used to expand or enlarge the coverage of the wireless network.

What is a wi-fi extender ?

A Wi-Fi range extender is a device which is used to expand the coverage of the Wi-Fi network. It is situated in between the router and the client that wishes to use the internet but isn’t close enough to get a good coverage or signal of the Wi-Fi or if the client is on the other side of any barrier. The Wi-Fi range extender basically repeats the Wi-Fi signal from the router so that the coverage can be expanded. The extender setup receives the signal from the Wi-Fi network and amplifies it and then it transmits the boosted signal to the client. With the help of a Wi-Fi Range Extender, the users can successfully almost double the coverage area of the Wi-Fi network, thus receiving the Wi-Fi signal in the far corners of their homes or offices or even their backyards.

Linksys wi-fi extender setup

Linksys routers are no doubt one of the best networking hardware in the market. But there are a few barriers and no technology is absolutely perfect. So due to some barriers, the Wi-Fi signal isn’t able to reach all the desired spots. And thus, the user will start facing some problems such as slow or no internet in some parts of their houses or work offices. In that case, the Linksys Extenders are the best solution to this problem. The Linksys Extenders provide very good and reliable speeds no matter where the client is. They expand the range of the wireless routers a lot and help in reducing or eliminating dead spots in the ill lit corners from the Wi-Fi signals of the houses. They only require setting up a first time when they are taken out of the box for the first time.

extender.linksys.com Setup

The setup is very easy and anyone can do it. Linksys extender specializes in simultaneous usage of both the bandwidths 2.4 GHz and the 5 GHz, for high speed data and helps provide interrupted video streaming or online gaming. This results in a much stronger and more reliable network allows the user to stay connected even in the furthest corners of their homes or offices. The Linksys Extenders can also be used to connect to different media devices so that you can connect to any media device without having to roam around and try to find them and then connect.
Here, we will show you the basic steps required in setting up and configuring the Linksys Extender.

http://linksysextender.net
http://linksysextender.net

How to Reset your Linksys Extender:

There might be some situations such as if you have forgotten or lost the login information of the Linksys Extender, a reset will be required. Here are some steps to reset your Linksys extenders:

  1. Open up any web browser of your choice and type extender.linksys.com in the address bar to access the Linksys Wi-Fi Extender setup page.
  2. Fill in the username and password so that you can access the Linksys Wi-Fi Setup page to reset your extender.
  3. Click the Administrative
  4. You will now see the Factory Default Click it.
  5. Now, click the Management
  6. Here, you can now restore the extender by clicking on the Restore Configurations
  7. Now, save all the settings.

Alternatively, you can reset your Linksys Extender manually as well. Here are the steps to manually reset your extender:

  1. Plug the Extender into a power source and turn it on.
  2. Locate the Reset button at the back of the Extender.
  3. Using small paperclip or something similar, press and hold the reset button for about 8 seconds.
  4. Release the reset button.

Now, your Linksys Extender will be restored to its factory default settings.

How to update the Firmware on the Linksys Extender:

A Firmware upgrade is very important as it brings out new features as well as fixes the previous issues and bugs in the extender. It also helps in securing the network from hackers and keeps the extender up to date with the latest media so that the extender can be connected to different media devices. Updating the Linksys Extender’s firmware helps in reaping the most benefits out of your Linksys Extender and it is a very easy process and only takes up a couple of minutes. Here are some steps to update your Linksys Extender’s Firmware:

  1. Open up a web browser of your choice and go to the official website of Linksys.
  2. Locate and download the latest firmware of your extender and save it.
  3. Now, go to the login page of the extender and fill in the login details.
  4. After logging in, select Administrative
  5. Under the Admin tab, you will find the Firmware Update
  6. Select it and choose the firmware that you just downloaded and upload it.
  7. After choosing the file, click on the Start Upgrade

After this, your Linksys Extender will start to update its firmware.

How to reset the password of Linksys Extender

  • Open any web browser of your choice and type extender.linksys.com in the address bar. Alternatively, you can enter the default IP address of the extender.
  • Enter the default password in the login window. If you have set a personalized password, enter that.
  • Click Administration on the web based setup page. Then click Management.
  • Enter the desired passphrase in the Extender Password field and then Re-enter to confirm the password.
  • Click Save to save the settings.
Your new settings will then be saved on the extender and you can now log in to your extender using the new password.